DUALANTENNAALIGN
Dual Antenna ALIGN configuration
|
Platform: |
OEM7720, PwrPak7D, PwrPak7D-E1, PwrPak7D-E2, CPT7 |
Use this command to enable or disable ALIGN and configure the ALIGN operation rates on a dual antenna receiver.
Message ID: 1761
Abbreviated ASCII Syntax:
DUALANTENNAALIGN switch [obsrate] [posrate]
Factory Default:
DUALANTENNAALIGN enable 1 1
Example:
DUALANTENNAALIGN enable 10 1
|
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
|---|---|---|---|---|---|---|---|
|
1 |
Command header |
– |
– |
DUALANTENNAALIGN header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary. |
– |
H |
0 |
|
2 |
Switch |
DISABLE |
0 |
Disable the dual antenna ALIGN feature |
Enum |
4 |
H |
|
ENABLE |
1 |
Enable the dual antenna ALIGN feature |
|||||
|
3 |
obsrate |
1, 2, 4, 5, 10, 20 |
Rate in Hz at which heading output is required (default = 1 Hz) |
Ulong |
4 |
H+4 |
|
|
4 |
posrate |
1, 2, 4, 5, 10, 20 |
Rate in Hz at which MASTERPOS output is required (default = 1 Hz) |
Ulong |
4 |
H+8 |
|
Dual antenna ALIGN rates (obsrate and posrate) are limited to the maximum position rate allowed by the receiver model.
When a receiver with a SPAN model is reset, the dual antenna ALIGN rates (obsrate and posrate) return to the default values of 1 Hz. This occurs even if the command settings have been saved using the SAVECONFIG command.