CNOUPDATE
Sets the C/No update rate
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
This command is used to set the C/No smoothing rate.
Message ID: 849
Abbreviated ASCII Syntax:
CNOUPDATE rate
Factory Default:
CNOUPDATE default
ASCII Example:
CNOUPDATE 20Hz
Use the CNOUPDATE command to change the smoothing rate of the C/No measurements of the incoming GNSS signals. By default, the C/No values are smoothed at approximately 200 ms (5 Hz) but this command allows a user to change that to 50 ms (20 Hz).
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
1 |
Command header |
- |
- |
CNOUPDATE header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary. |
- |
H |
0 |
2 |
rate |
DEFAULT |
0 |
Default 5 Hz (200 ms) C/No smoothing rate |
Enum |
4 |
H |
20HZ |
1 |
20 Hz (50 ms) C/No smoothing rate |