ASSIGNALL

Assigns all channels of a satellite system

Platform:

OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2

The ASSIGNALL command should only be used by advanced users.

This command is used to override the automatic satellite channel algorithms with manual instructions for all channels in a satellite system.

Message ID: 28

Abbreviated ASCII Syntax:

ASSIGNALL [system][state][prn [Doppler [Doppler window]]]

ASCII Example 1:

ASSIGNALL GLONASS IDLE

In example 1, all GLONASS channels are idled, essentially stopping the receiver from tracking GLONASS.

ASCII Example 2:

ASSIGNALL GLONASS AUTO

In example 2, all GLONASS channels are enabled in auto mode. This enables the receiver to automatically assign channels to track the available GLONASS satellites.

This command is the same as ASSIGN except that it affects all SV channels of the specified satellite system.

These command examples are only applicable to specific receiver models.

If the system field is used with this command and the receiver has no channels configured with that satellite system, the command is rejected.

Field

Field Type

ASCII Value

Binary Value

Description

Format

Binary Bytes

Binary Offset

1

Command header

-

-

ASSIGNALL header

This field contains the command name for abbreviated ASCII or the message header for ASCII (see page 1) or Binary (see page 1).

-

H

0

2

system

See Table: Satellite System

Satellite system to assign. If no value is specified, the value defaults to ALL.

Enum

4

H

3

state

Refer to Table: Channel State)

Set the SV channel state.

Enum

4

H+4

4

prn

Refer to PRN Numbers

Optional satellite PRN code. A value must be entered if the state parameter is neither IDLE or AUTO.

Ulong

4

H+8

5

Doppler

-100 000 to

100 000 Hz

Current Doppler offset of the satellite.
(default=0)

Note: Satellite motion, receiver antenna motion and receiver clock frequency error must be included in the calculation of Doppler frequency.

Long

4

H+12

6

Doppler window

0 to 10 000 Hz

Error or uncertainty in the Doppler estimate above.
(default=4500)

Note: This is a ± value
Example, 500 for ± 500 Hz

Ulong

4

H+16

Satellite System

Binary

ASCII

Description

3

ALL

All systems

99

GPS

GPS system

100

SBAS

SBAS system

101

GLONASS

GLONASS system

102

GALILEO

GALILEO system

103

BEIDOU

BeiDou system

104

QZSS

QZSS system

105

NAVIC

NavIC system

GLONASS SVs cannot be assigned if there is no information on GLONASS frequencies and matching slot numbers.