APPROXPOSTIMEOUT

Timeout for approximate positions in the receiver

Platform:

OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2

This command sets the approximate position timeout of the receiver. Approximate positions are used upon startup of the receiver to populate the satellite visibility lists (see SATVIS2 log) that aid in initial acquisition of signals. By default, an approximate position times out after 150 seconds and the receiver reverts to a cold search. This command is typically used in a high dynamic application where an initial position becomes inaccurate.

Message ID: 1513

Abbreviated ASCII syntax:

APPROXPOSTIMEOUT timeout

Factory default:

APPROXPOSTIMEOUT 150

ASCII example:

APPROXPOSTIMEOUT 20

Field	Field type	ASCII value	Binary value	Description	Format	Binary bytes	Binary offset
1	Command header	–	–	APPROXPOSTIMEOUT header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary.	–	H	0
2	Timeout	0 to 86400		Timeout in seconds. Default = 150	Ulong	4	H